4" NO PARKING and FIRE LANE Parking Lot Stencils for Vertical Curb 1/16", 60 Mil

Description

My book on Pavement Marking;
How I Stripe a Parking Lot...28 Years...By Myself
, is also listed here, on eBay. Fourth Edition.
I also manufacture stencils.
They're the best material...all Pavement Marking companies buy. They're not stiff or corrugated. ( Try not to buy any other. )
They're easily readable...not squished. We also have the biggest "Edge Distances".
And
seriously
...they're re-usable...and easy to clean.
Thanks in advance.
Here’s what you’re buying;
(1) NO PARKING Stencil with 4" tall letters.
(1) FIRE LANE Stencil with 4" tall letters.
Both are cut for the "Rise" of a curb. The vertical portion.
We also have the same stencils "centered" listed here, on eBay...if you're spraying flat.
The bottom edge distance is just 1/2".
The top edge distance my standard 2".
The letters are a standard 3" width.
More Plastic
.
More Strength
.
I only use the best Low Density Polyethylene Plastic Compounds.
And...they're 60 MIL thick Low Density Polyeth
ylene Plastic...= 1/16" thick.
ALL of my own, personal stencils, which I use everyday...and are hanging on my shop wall...are .125" thick...= 1/8th inch.
BUT...for occasional use...this 1/16" thickness will serve you well.
And again...they're re-usable. Either wipe them down wet...or...let them dry. If they're dry, simply bend the Polyethylene Plastic and the dried over spray peels off.
I'm Dan Zurcher and I own American Striping. I hope I helped.
( Subscribe to my eBay Store. I have every stencil, my Manual and other proprietary Pavement Marking items listed. )