-40%
Automatic Antenna Tuner 100W 1.8-50MHz w/ 0.96" OLED ATU100 Assembled W/ Shell
$ 16.51
- Description
- Size Guide
Description
HomeElectronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
Automatic Antenna Tuner 100W 1.8-50MHz w/ 0.96" OLED ATU100 Assembled W/ Shell
Popular
Popular
Product Introduction
Only the model 3 version with a housing comes with a battery! ! !
Model 1#: Unassembled, need welding, without battery.
Model 2#: Welding has been completed, without battery.
Model 3#: Welding has been completed, with shell and 400mA battery.
Model
1#
Model 2#
Model 3#
Unassembled, need welding, without battery
Unassembled, need welding, without battery
Welding has been completed, with shell and 400mA battery
Made of fine quality material, practical, easy to operate and use, has a long service life.
Features:
Made of fine quality material, has a long service life.
Easy to install and use.
Kit of ATU (automatic antenna tuner) developed by N7DDC.
More professional, more stable and better performance.
Specifications:
Main material: PCB
Main color: yellow+blue
Power supply range: 10-15V DC
Max. current: 300mA
Max. working power: 100 watts
Max. measured power: 150 watts
Minimum power for tuning start: 1 watt
Recommended maximum power while tuning not above 30 watts. (after tuning you can set 100 watts and work on this power)
Minimum measured power: 0.1 watt
Step for measurement on powers under 10 watts: 0.1 watt
Step for measurement on powers above 10 watts: 1 watt
Power measurement accuracy: 10%
Maximum inductance set: 8.5 uH
Minimal step for setting inductance: 0.05 uH
Maximum installed capacity: 1870 pF
Minimal step for setting capacity: 10 pF
100 Watts tuner, 7x7 (7 capacitors x 7 coils) based on PIC 16F1938.
Package size: 150 * 100 * 40mm / 5.9 * 3.9 * 1.6in
Package weight: 240g / 8.5ounce
Note:
1. DIY kit, need to have welding ability.
2. No need to burn-firmware.
3. SMD electronic components are not soldered.
4. with OLED.
5. All information about project you can find on GitHub (N7DDC).
Packing List:
1 * PCB for ATU-100 7x7 HF Autotuner
1 * Set of Toroids (6pcs T68-2, 1pcs BN43-202)
1 * Set of Parts (PIC16F1938 (1pcs) soldered on PCB with default firmware v3.0, 4pcs 100R 2512 1%, 15pcs relay HK4100F-DC12V, 1pcs 0.96 inch OLED)
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
Automatic Antenna Tuner 100W 1.8-50MHz w/ 0.96" OLED ATU100 Assembled W/ Shell
Product Introduction
Only the model 3 version with a housing comes with a battery! ! !
Model 1#: Unassembled, need welding, without battery.
Model 2#: Welding has been completed, without battery.
Model 3#: Welding has been completed, with shell and 400mA battery.
Model
1#
Model 2#
Model 3#
Unassembled, need welding, without battery
Unassembled, need welding, without battery
Welding has been completed, with shell and 400mA battery
Made of fine quality material, practical, easy to operate and use, has a long service life.
Features:
Made of fine quality material, has a long service life.
Easy to install and use.
Kit of ATU (automatic antenna tuner) developed by N7DDC.
More professional, more stable and better performance.
Specifications:
Main material: PCB
Main color: yellow+blue
Power supply range: 10-15V DC
Max. current: 300mA
Max. working power: 100 watts
Max. measured power: 150 watts
Minimum power for tuning start: 1 watt
Recommended maximum power while tuning not above 30 watts. (after tuning you can set 100 watts and work on this power)
Minimum measured power: 0.1 watt
Step for measurement on powers under 10 watts: 0.1 watt
Step for measurement on powers above 10 watts: 1 watt
Power measurement accuracy: 10%
Maximum inductance set: 8.5 uH
Minimal step for setting inductance: 0.05 uH
Maximum installed capacity: 1870 pF
Minimal step for setting capacity: 10 pF
100 Watts tuner, 7x7 (7 capacitors x 7 coils) based on PIC 16F1938.
Package size: 150 * 100 * 40mm / 5.9 * 3.9 * 1.6in
Package weight: 240g / 8.5ounce
Note:
1. DIY kit, need to have welding ability.
2. No need to burn-firmware.
3. SMD electronic components are not soldered.
4. with OLED.
5. All information about project you can find on GitHub (N7DDC).
Packing List:
1 * PCB for ATU-100 7x7 HF Autotuner
1 * Set of Toroids (6pcs T68-2, 1pcs BN43-202)
1 * Set of Parts (PIC16F1938 (1pcs) soldered on PCB with default firmware v3.0, 4pcs 100R 2512 1%, 15pcs relay HK4100F-DC12V, 1pcs 0.96 inch OLED)
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.