-40%
Davicom DV-Micro-1 Monitor unit
$ 633.6
- Description
- Size Guide
Description
This item was taken out of a working environment, it appears to be in great working condition, I have pluggedit into an AC outlet and it powers on, however i do NOT have the means or knowledge to do any further
testing, therefore i am selling it as is. The following information is from the manufacturer's Website.
2
3
4
5
Item: DV-Micro-1
DV-Micro is designed to handle your small-budget remote-control & monitoring needs.
I/O capability includes 8 metering, 8 status and 8 relays, and communications is achieved over dial-up or IP networks. The DV-Micro operates with the same Graphical User Interface (GUI) as other MAC products, so personnel can easily control all sites, from the smallest to the largest, with a unit from the Davicom MAC family.
The DV-Micro is just as intelligent as other MAC units with extensive condition-driven and event-driven programming capabilities. It boasts the industry's widest choice of communication means, including: voice/DTMF, PC, FAX, E-Mail, pager, text messaging and Web Browser. It also allows easy access via a Blackberry ® or smart phones.
Take a look at the Davicom DV-Micro product line and you'll never want to look another remote control again.
Non-expandable, half rack unit (8 metering, 8 status, 8 output relays and 1 audio input (no RS232 reach through port). With internal dialup modem (voice interface and DTMF control), 1 Ethernet port, 1 USB Host and 1 USB Device.
Features
128 internal event timers
Alarms via E-Mail with HTML or XML file attachments
USB device port on front panel
Alarms via SMS
USB host port on back panel
Transmission to multiple Pagers
Secure IP over Ethernet or Internet
Vocal descriptions from 400-word vocabulary
Automatic action on conditions or events
Sync to NTP & ACTS servers
Voice response/DTMF over phone
Battery Discharge Test
Bilingual voice
333 MHz Processor Speed
Bilingual screens
2 MB Internal Battery Backed RAM
Can accommodate up to 6 modems (1 internal)
PSTN Caller ID placed in log
FAX transmission capability
RF immunity to 10V/m
SMS transmission capability
Electro Static Discharge immunity to 12kV
Compatible with DavNet NOC software
User configurable screens
Integrated Web Server
Multiple workspaces
100 ms sampling interval on inputs
Operates from 12 VDC supply
Individual Relay pulsing to 0.1s resolution
Automatic Day-Night settings from Latitude & Longitude
16 alarm-call lists with 10 recipients per list
Logging to: System log, Custom log, EAS log, Data log
Configurable delays on individual alarms
Automatic VSWR calculation
Hysteresis on metering inputs
Linearization of sensor inputs
Local ping of 32 network devices
Activity Timer on Status Inputs
4 Multiple simultaneous users
No moving parts (Cooling Fan or HDD)
16 Math Functions
Modbus I/O expansion capability in TCP or RTU modes
Automatic detection of PSTN dial-tone
Special IP commands between remote DV-Micro units
Specifications
Metering (Analog) Inputs: Resolution: 12 bits; Single-ended inputs; 0-5V, with attenuation ranges selectable on external I/O board. Impedance > 100 kOhms;
Status (Digital) Inputs: EIA compatible; Opto-isolated; Impedance > 22 kOhms; Detection levels: -12 to +0.8 VDC (low), +2.4 to +12 VDC (high).
Audio Input: -20 to +10 dBm (300-3000 Hz); Impedance 10 kOhms.
Outputs (Commands): Selectable NO/NC dry contact relays (70 VAC @ 0.4 A, 30 VDC @ 2 A) or open collector (100 mA)
Auxiliary DC Outputs: 5 VDC x 1 (250 mA total), 12 VDC x 1 (250 mA total)
Local Access Port: 115200 bps, USB Type B connector located on front panel.
Serial Ports for On-Site Ancillary Equipment through USB Hub & Dongles: 1200 to 115200 bps, DB9 male on USB dongles connected through USB hub.
Extra Ports for External Modems through USB Hub: USB modems required. Must support Linux CDC drivers.
Internal Modem: RJ-11 jack located on rear panel; Voice/Fax/Data; 56 kbps maximum; Fax up to 14400 bps; DTMF interface.
External USB Storage through USB Hub: Up to 4 external USB memory devices. FAT32 formatted devices only.
Real Time Clock (RTC): Standard: 20 PPM accuracy, stability of 1.25PPM/°C between -10 & +60°C. TCXO Option: 3.8 PPM between -10°C & +60°C. Equivalent to 10 seconds per month.
Power Requirement: 11.5-14.5 VDC, 1 A Max.
Fuse: 250 V, 3 A
Electric Fields: Tested to 10 V/m
Electrostatic Discharge (ESD): Tested to 12 kV
Operating Temperature Range:
32 to 122°F
0 to 50°
C