-40%

GHE400MD A-2 SULFUR HEXAFLUORIDE (SF6) GAS RECLAIMER ON CART

$ 4751.47

Availability: 100 in stock
  • Restocking Fee: No
  • Return shipping will be paid by: Buyer
  • MPN: GHE400MD
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • Brand: Unbranded
  • All returns accepted: Returns Accepted
  • Condition: Used
  • Model: GHE400MD

    Description

    YOU ARE PURCHASING THE RECLAIMER
    THAT IS PICTURED AND DESCRIBED
    ITEM WAS JUST WAS REMOVED FROM SERVICE AND WAS WORKING
    IF YOU NEED ADDITIONAL PICTURES LET ME KNOW
    ITEM MUST GO FREIGHT OR LOCAL PICKUP PLEASE SEE BELOW
    ITEM IS APPROX 78" TALL 72" WIDE AND 40" DEEP
    WEIGHT IS APPROX 3,00 POUNDS WITH THE CART
    I CAN ARRANGE DELIVERY FOR A FEE FROM A LOCAL GUY
    UP TO 200 MILES TO MEET OR DROP OFF
    WE ALSO CAN LOAD ON YOUR TRUCK OR TRUCKER FREE OF CHARGE
    YOU MUST HAVE A WAY TO OFF LOAD THE ITEM
    RECLAIMER IS ON WHEELS SO DOES ROLL AROUND
    SOME INFO BELOW
    RM
    The energy produced by electrical arc in a circuit breaker is absorbed by SF6 gas. The sulfur hexafluoride molecules temporarily disassociate under arcing and recombine after the arc is extinguished. Because air contains moisture and other contaminants, it must be removed so that it dost not adversely affect the recombining mechanism of the SF6 molecule. The GHE400 reclaiming system offers the user all the tools to prevent contaminating new gas and includes the capability to remove decomposition byproducts from gas that has been in service.
    The main components used to transfer gas on the GHE400 are the compressor and booster. The compressor is used for bulk transfer of gas out of the electrical apparatus into storage. Even though there is oil in the crankcase, the compresor will not allow oil to come in contact with the SF6 gas, so there are no oil separation devices to monitor. The compressor and booster will transfer oil-free SF6 at an average rate of 280 lbs/hr. It is capable of pulling 10 Torr of vacuum on the breaker, which means it is capable of reclaiming 99.8% of the SF6 from the breaker.
    The vacuum pump is used to remove air from the electrical apparatus, connecting hoses, and the piping on the reclaiming system itself. The vacuum pump discharges to atmosphere and is not connected to the compressor. The pump is oil lubricated and it is a frequently used component because step one of most operations begins with evacuating the hose.
    The SF6 gas vaporization system is another important component. It is used during refilling operations. Liquid SF6 is allowed to enter a heat exchanger where it is converted to a gas by temperature and pressure dynamics. It is an automatically controlled process. Once the vaporizer switch is turned on and SF6 is allowed to flow from the storage tank, the vaporization system will not allow liquid SF6 to be transferred to the circuit breaker.
    A fan cooled, high efficiency steel heat
    exchanger
    is located in the piping after the compressor. It is used to remove the heat of compression from the gas to help facilitate compressing the gas in storage to a liquid.
    The system design incorporates three ports to which hoses can be attached. Gas can be transferred and processed through a number of different flow paths, depending on the port and valve arrangement selected. This covered in detail in the operating section of the manual.
    The humidity gauge is the thin film polymer senso which reads
    dew-point
    (in degrees Fahrenheit) of the SF6 gas. The
    dew-point
    value can be read from the PLC display on the valve panel. The
    humidity
    gauge is
    factory
    calibrated and the setting buttons should not be pressed at any time.
    PLEASE READ
    THIS ITEM MUST GO FREIGHT OR LOCAL PICK UP
    IN BELLEVILLE, MI 48111
    WE CAN ARRANGE SHIPPING OR YOU CAN
    WE NORMALLY GET A PRETTY GOOD RATE THOUGH OUR SHIPPER
    ABOUT 200.00 EAST OF THE MISSISSIPPI AND 275.00 WEST OF IT
    FOR THE AVERAGE PALLET TO A COMMERCIAL ADDRESS WITH SOME TYPE OF OFF LOAD CAPABILITIES ( NO RESIDENTIAL DELIVERY ) YOU ALSO HAVE THE OPTION OF PICKING IT UP AT THE TRUCKING TERMINAL
    THERE ARE SEVERAL
    VARIABLES
    IN FREIGHT SHIPPING SUCH AS WEIGHT AND CLASSIFICATION, PLEASE KEEP THIS IN MIND
    WE WILL ESTIMATE SHIPPING FOR YOU PRIOR TO PURCHASE IF YOU MESSAGE US WITH A ZIP CODE
    WE WILL GET THE ITEM READY TO SHIP ON A PALLET, SECURE IT AND LOAD IT ON YOUR SHIPPERS TRUCK AT NO ADDITIONAL CHARGE
    WE UNDER NO CIRCUMSTANCES REFUND FREIGHT SHIPPING COST
    WE DO HOWEVER WELCOME YOU TO VIEW THE ITEM AT OUR FACILITY