Hobart Garbage Disposal FD4/150-1 With Feet - WE SHIP DOMESTIC AND INTERNATIONAL

Description

Hobart Garbage Disposal FF4/150-1. Condition is "Used".
Was working before putting into storage last year.
This is used equipment your getting the unit as is, pictured as it will be shipped
Hobart
FD4/150-1
Description
The Hobart FD4/150-1 garbage disposer has a durable iron upper housing and a cast iron lower housing. Four removable bolts attach the motor unit to the grind chamber. Equipped with manual-reset thermal overload inherent protection to prevent overheating, the motor has lubricated ball bearings for upper and lower shaft support. To reduce metal-on-metal contact and minimize noise, a vinyl isolating ring is placed at the cone mounting. The recessed mating surfaces are protected from fibers and grit.
The Hobart FD4/150-1 garbage disposer has stainless steel legs with adjustable flanged feet to support the housing. For new cutting edges, the two replaceable hardened ductile iron cutter blocks can be indexed. The flywheel is made of hardened cast ductile iron and measures 8-inches diameter. The disposer operates in either direction of the flywheel rotation and has a 1
3
⁄
8
-inch-high abrasion-resistant stationary shredder ring with 40 grinding teeth.
Product Details
Durable iron upper housing
Heavy-duty gray cast iron lower housing
Motor unit is attached to the grind chamber by 4 removable bolts
Stainless steel legs with flanged feet can be adjusted as much as 3 in.
Motor has lubricated ball bearings for upper and lower shaft support
Fastens to 7-in. I.D. cones
Vinyl isolating ring at the cone mounting reduces noise and vibration
1
3
⁄
8
-in.-high abrasion-resistant stationary shredder ring with 40 grinding teeth
Manual-reset thermal overload inherent protection on the motor
2 replaceable hardened ductile iron cutter blocks can be indexed for new cutting edges
8-in.-dia. hardened cast ductile iron flywheel
Recessed mating surfaces are protected from grit and fibers
Mechanical face-type seal with a spring-loaded carbon ring insert in chemical resistant neoprene bellows
Removable outlet flange tapped for a 2-in. pipe connection
Operates in either direction of the flywheel rotation
2.4-4.8 A, 1
1
⁄
2
HP
208-240/480 V/60 Hz/3 ph
28
7
⁄
8
in. H
ETL-sanitation listed