HV-320E-PA1200 FPV Full HD Video Transmitter (100~2500MHz), HDMI/CVBS to DVB-T

Description

HV-320
is the most cost-effective solution to transmit long range HD video for FPV application with digital TV technology.
The video input source from either HDMI/DVI or composite (CVBS) is encoded in H.264 streams, modulated with the open industrial standard EN 300-744 DVB-T/ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb
*
, and then transmitted over cable or air.
*
HV-320E supports EN 300-744 DVB-T modulation while HV-320J supports ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb modulation.
All DVB-T/ISDB-T/ ISDB-Tb compliant receivers
**
,
including SetTopBox, Digital TV, PC/NB USB DTV dongle, or DTV capture card can receive, and watch the video from a HV-320 via the standard coaxial cable or antenna.
**
HV-320 supports only H.264 video encoding
, so the receiver should be able to decode H.264 stream while old DVB-T/ISDB-T TV’s may not.
Features
High Performance Wide Frequency Rage Support
Direct digital conversion to 100..2500 MHz for excellent signal quality
Professional grade modulation error rate (MER)
Flexible Bandwidth Option
In DVB-T mode, 1MHz~8MHz Bandwidth options are supported.
UART Digital Data Mux
HV-320 supports UART data mux feature. GPS or aviation data can be multiplexed in the transmitted stream from HV-320’s UART port. Besides audio and video, the receiver can decode the received UART data for further data processing.
The communication parameters for the data mux UART port are configurable.
Security for anti-eavesdropping
Support both RF layer and TS data layer encryption.
Low Cost HD Video Distribution
Compliant to existing HD TV sets, no extra adapter required, and no restriction on the number of receivers. All the peripherals like splitter, amplifier, connector…etc are the same as those for regular TV.
In DVB-T mode, 1MHz~8MHz Bandwidth options are supported.
Versatile video inputs
Support HDMI/DVI and composite (CVBS) video input.
Easy to Configure
Channel number can be switched with the IR RC or onboard push buttons easily.
*The channel list mapping is user configurable (channel number -> frequency/bandwidth)
More advanced configurations can be set from an external host like PC/NB thru serial port interface. UART control protocol and API/SDK available on request.
Robust, Reliable and Long Distance
Easily transmit 1080p video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater.
For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 30 dBm with an external PA. The real distance depends on the antenna design and receiver quality.
Differential RF output is also available for RF signal distribution with twisted pairs (telephone or Ethernet RJ-45) instead of heavy coaxial cables.
Daisy-chain Connection (Bus-Topology)
Multiple HV-320’s with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
Real time protocol and Low latency
No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency
*With HV-120/HV-110, the latency for 1080P HD is about 250mS
Order Information:
Model
Features
HV-320E
DVB-T (H.264 only), channel frequency range 100-2500MHz
HV-320E-PA430
DVB-T (H.264 only), channel frequency range 100-2500Hz
With 400~500 MHz  band power amplifier, >20dBm* average OFDM output
HV-320E-PA700
DVB-T (H.264 only), channel frequency range 100-2500Hz
With 500~700 MHz (TVWS) band power amplifier, >20dBm* average OFDM output
HV-320E-PA900
DVB-T (H.264 only), channel frequency range 100-2500Hz
With 800~950MHz band power amplifier , >20dBm* average OFDM output
HV-320E-PA1200
DVB-T (H.264 only), channel frequency range 100-2500Hz
With 1.2G band power amplifier ,
>20dBm* average OFDM output
HV-320E-PA2400
DVB-T (H.264 only), channel frequency range 100-2500Hz
With 2.4G band power amplifier,
>20dBm* average OFDM output
HV-320J
ISDB-T (H.264 only), channel frequency range 100-2500MHz
*the PA output power designated is average power for OFDM output, while the peak power for sine tone output is around 30dBm, 1W.
General Specifications:
Input
Video: CVBS, HDMI 1.3
Audio: Stereo line-in or HDMI PCM audio-in
Compression
Video: H.264
Audio: AAC or MPEG
Resolution
Input
CVBS
720x480x30I (NTSC, D1)
720x576x25I (PAL, D1)
HDMI
720x480x30I (NTSC, D1)
720x576x25I(PAL, D1)
1280x720x50I/1280x720x50P
1280x720x60I/1280x720x60P
1920x1080x24P
1920x1080x50I/1920x1080x50P
1920x1080x60I/1920x1080x60P
Video Output
Compression:H.264
Frame size:
720x480x30P (NTSC, D1)
720x576x25P (PAL, D1)
1280x720x25P
1280x720x30P
1920x1080x24P
1920x1080x25P
1920x1080x30P
Note: the output frame size is the same as the input, no scale-up or scale-down feature supported
Power
HV-320 without PA
5 V or 6~16V DC
1420 mA@5V
470mA@12V
HV-320-PA430
HV-320-PA700
12V DC
850mA@12V
HV-320-PA900
HV-320-PA1200
HV-320-PA2400
5V or 12V DC
2050mA@5V
720mA@12V
Dimension WxDxH
W(105 mm) x D(75 mm) x H(35 mm)
(Bare bone PCBA size: 100mmx70mm)
Weight
175g
(Bare bone PCBA weight 55g)
Operating Temperature
-10
℃
~ 60
℃
Digital TV RF Transmitter Specifications:
Parameter
Value
TV Standard
HV-320E
DVB-T EN-300 744
HV-320J
ISDB-T ARIB STD-B31
ISDB-Tb
ABNT NBR 15601
RF connector
50-Ω SMA connecter
Bandwidth
HV-320E
1/2/3/4/5/6/7/8 MHz
HV-320J
6MHz
FFT
2K, 4K, 8K
Code rate
1/2, 2/3, 3/4, 5/6, 7/8
Guard interval
1/4, 1/8, 1/16 or 1/32
Frequency range
100~2500MHz, step size 1KHz
Segment & Layer
HV-320E
n/a
HV-320J
13 Seg
Time Interleaver
HV-320E
n/a
HV-320J
Not supported
RF Output Level (dBm)
Hv-320E/HV-320J **
Frequency
177.5
MHz
474
MHz
666
MHz
915
MHz
1250
MHz
2450
MHz
Max
6.5
6.5
6.5
5.5
5.5
0
HV-320E-PA430
HV-320J-PA430
400~500MH
z
+20
dBm (with 400~500MHz  Power Amplifier)
HV-320E-PA700
HV-320J-PA700
500~700MH
z
+20
dBm (with 500~700MHz  Power Amplifier)
HV-320E-PA900
HV-320J-PA900
800~950MH
z
+20
dBm (with 900MHz  Power Amplifier)
HV-320E-PA1200
HV-320J-PA1200
1200~1350M
z
+20
dBm(with 1.2G Power Amplifier)
HV-320E-PA2400
HV-320J-PA2400
2400~2500M
z
+20
dBm(with 2.4G Power Amplifier)
Digital Gain/Attenuator
for Fine Tuning
R
ange: +0dB~-25dB , Step size 1dB
Default: -5dB
MER
Typically, @-5 dB attenuation by ADRF6755
>38dB@V-band
>38dB@470-950 MHz
>35dB@950-1900MHz
>33dB@1900-2500MHz
(>25dB with 700M/900M/1.2G/2.4G +20 dBm output PA)
Spectrum Shoulder
(Adjacent channel)
>48dB
Phase noise
<-92dBc @ 10kHz
Carrier Suppression
>42dB
Specifications are subject to change without prior notice.
*: There could be MER loss in high gain/attenuation level.
HV-320 Application Scenario-FPV
UART GPS Data Mux (Demux’ed by HV-120)
UART GPS Data Mux (Demux’ed by USB Receiver Dongle)
HV-320 Application – Entertainment HD Video Distribution
HV-320 Application – Live Video Broadcast
HV-320 Application – Digital Signage
HV-320 Application Scenario-Wireless
HV-320 Application Scenario-Wired
System Deployment Example – Daisy-Chain Bus Topology