KAIWEETS Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Aut...

Description

Brand New KAIWEETS Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC Clamp Meter)
Manufacturer model:
HT206B
True-RMS clamp meter: This voltage meter can accurately measure AC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
NCV Defection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36-Month product service provided. 7/24 Customer Service.
Description
Product Description
HT208D 1000A AC/DC Inrush Clamp Meter
HT200B 200A AC Clamp Meter
HT206B 600A AC Clamp meter
HT206D 600A AC/DC Clamp Meter
HT208A 1000A AC Inrush Clamp Meter
Maximum Display
6000 Counts
2000 Counts
6000 Counts
6000 Counts
6000 Counts
AC Voltage
600mV/6V60V/600V/750V
2V/20V/200V/600V
6V/60V/600V
6V/60V/600V
600mV/6V60V/600V/750V
DC Voltage
600mV/6V/60V/600V/1000V
200mV/2V/20V200V/600V
600mV/6V/60V/600V
600mV/6V/60V/600V
600mV/6V/60V/600V/1000V
AC Current
60A/600A/1000A
2A/20A/200A
6A/60A/600A
60A/600A
60A/600A/1000A
DC Current
60A/600A/1000A
60A/600A
Resistance
600Ω/6kΩ/60kΩ/600kΩ/ 6MΩ/60MΩ
200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ
600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ
600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ
600Ω/6kΩ/60kΩ/600kΩ/ 6MΩ/60MΩ
Capacitance
10nf/100nf/1000nf/10uf/ 100uf/1000uf/10mf/100mf
2nF/20nF/200nF/2uF/20uF/200uF/ 2mF
10nF/100nF/1mF/10mF/100mF/1mF/10mF/100mF
10nF/100nF/1mF/10mF/100mF/1mF/10mF/100mF
10nf/100nf/1000nf/10uf/ 100uf/1000uf/10mf/100mf
Temperature/Frequency
✓
✓
✓
✓
NCV
✓
✓
✓
✓
Flashlight/Backlight
✓
only backlit
✓
✓
✓
To measure Alternating Current
Specifications:
If current> 3A, the orange display lights up.
The measuring range of AC current is 6A/60A/600A. Accuracy: ±(2.5%+5).
Note:
To measure the current you need to clamp the meter around one of the wires and not the whole power cord. The power cord contains two wires carrying current and ground wire. The current in two wires always flows in opposite directions, so the magnetic fields from two wires canceling each other, therefore the meter reads 0 A.
Grasp the individual current conductor to be measured and close the current clamp again. The measured conductor must be placed in the center of the clamp, otherwise, additional errors will occur.
To measure AC/DC Voltage
Specifications:
Press the "FUNC." key to change the AC or DC voltage measurement.
If the voltage is> 80 V, the orange display lights up.
The measuring range of AC voltage is 6V/60V/600V. Accuracy: ±(1.0%+3).
The measuring range of DC voltage is 600mV/6V/60V/600V. Accuracy: ±(0.5%+3).
Note:
The voltage value needs to be measured using test leads, the clamp cannot be used directly.
Jaw Design
The Jaw is marked with maximum voltage and current measured value. Suitable for one-hand operation
Weight & Size
Weight :260g. Size: 7.5 x 2.8 x1.3 inches.
Small and light, easy to carry when working.
AC Current Measurement
To measure the current, you only need to clamp the live wire rather than the whole power cord.
Read more
FUNC. Button Measurement
Press the "Func." button to switch the respective secondary function between the different measurements such as between AC and DC.
Automatic Shutdown
No operation in 15 minutes, the clamp meter beeps 3 times. Without further operation, it beeps again and switches off automatically.
Multi-Function
Accurately measure resistance, capacitance, diode, continuity. Easy to use in laboratory factories and homes.
Read more
Shipping and Handling
Please allow 5-7 business days for the package to arrive, regardless of buyer location within the US.
We will provide an online tracking number to you once the item has been shipped.
It may take a few business days for our automated system to process the tracking number onto eBay. However, this will not affect the shipping times.
Return Policy
All our products are brand new and sealed. All items qualify for returns within 30 days of receipt.
Feedback
We take our reputation seriously. If you have any questions or concerns, please contact us and we will respond back to your message within 24 hours.