Lock-in Amplifier LIA AD630 Module Minimum System Phase Sensitive Detection

Description

Lock-in Amplifier LIA AD630 Module Minimum System Phase Sensitive Detection
Description
Name: AD630 Lock-in amplifier
Dimensions: 46mm * 40mm
Supply Voltage Range: ±5V~±18V
Highlights:
AD630 phase-lock amplifier integrated with pre-amplifier OPA627 and 4-order ultra-low Butterworth filter
The smallest phase-lock amplification system
Can detect and extract weak signal
Modulation function of AD630
Features:
Recovers signal from 100 dB noise
2 MHz channel bandwidth
45 V/µs slew rate
Low crosstalk: −120 dB at 1 kHz, −100 dB at 10 kHz
Pin programmable, closed-loop gains of ±1 and ±2
0.05% closed-loop gain accuracy and match
100 µV channel offset voltage (AD630)
350 kHz full power bandwidth
Applications:
Balanced modulation and demodulation
Synchronous detection
Phase detection
Quadrature detection
Phase sensitive detection
Lock in amplification
Square wave multiplication
General Description:
The AD630 is a high precision balanced modulator/demodulator that combines a flexible commutating architecture with the accuracy and temperature stability afforded by laser wafer trimmed thin film resistors. A network of on-board applications resistors provides precision closed-loop gains of ±1 and ±2 with 0.05% accuracy (AD630B). These resistors may also be used to accurately configure multiplexer gains of 1, 2, 3, or 4. External feedback enables high gain or complex switched feedback topologies.
The AD630 can be thought of as a precision op amp with two independent differential input stages and a precision comparator that is used to select the active front end. The rapid response time of this comparator coupled with the high slew rate and fast settling of the linear amplifiers minimize switching distortion.
The AD630 is used in precision signal processing and instrumentation applications that require wide dynamic range. When used as a synchronous demodulator in a lock-in amplifier configuration, the AD630 can recover a small signal from 100 dB of interfering noise (see the Lock-In Amplifier Applications section). Although optimized for operation up to 1 kHz, the circuit is useful at frequencies up to several hundred kilohertz.
Other features of the AD630 include pin programmable frequency compensation; optional input bias current compensation resistors, common-mode and differential-offset voltage adjustment, and a channel status output that indicates which of the two differential inputs is active.
Please Note:
This Lock-in amplifier can be changed to Balanced modulator, Need to change the circuit by yourself. Methods as below:
1. The R4 (0 ohm resistor) removed, R3 shorted or welded on 0 ohm resistor
2. Pick the mode selection to the left and select it as the modulation mode
3. Short the R14
Package include
1× Module
Shipping
Item will be shipped within 24 -48 hours after full payment is received.
Normally the shippment to worldwide is used to take 25 to 30 business days, exclude Sat & Sun.
Payment
We accept PayPal only.
Payment must be received in 7 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in ebay note when you pay the order.
Any special request cannot be accepted after 24 hours of payment,because most of orders will be processed instantly and same day dispatched.
Contact Us
If you have any questions, please feel free to email our servicer ，and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact. If you haven't received item in 45 days, please contact us and we will arrange refund or resend
Feedback
Customer satisfaction is very important to us. If you have any problem with your order,please contact us and we will do our best to make you satisfied, please do not leave a negative feedback before we resolve your problem.
We guarantee that your issue will be solved quickly.
As long as you are happy with your purchase of , please leave us a positive feedback.
Your feedback is very important to us it affects our search placement on eBay. We will leave a positive feedback for you in return automatically once we receive your feedback