Parking Sensor Kit with 8 Backup Sensors OEM for Toyota Sienna Venza Noah X Mark

Description

General Discription
This item is made for Toyota cars without factory parking sensors. It works exactly the same way with original factory parking sensors. It shows the sensors on the central dash screen or the colorful instrument panel. For cars with aftermarket screen, the sensors are also working, but it may not be displayed on the after-market screen unless the screen comes with a CANBUS decoder. For cars installed an ANDROID screen, we may also offer an solution for the sensor to be displayed on the android screen. But the product is different, please specify us. Thanks.
Purchase Notice
:
Please leave information such as car model, make, color, trim, bumper pictures, meter and central dash screen pictures before or when purchase, so that we can send you a right item. Please also leave your phone number so that the delivery company can reach to you easily. Thanks a lot.
Models fit
We have the following models available. Please clarify the details of your car when ordering, such as model, year, make, screen, bumpers, color, thank you. : 1, RAV4 16-18; 2, RAV4 19-ON; 3, Corolla 16-18; 4, Corolla 19-ON; 5, Camry 15-17; 6, Camry 18-ON; 7, Avalon 18-ON; 8, Highlander 15-19; 9, Highlander 20-ON; 10, Prado 15-ON; 12, Landcuiser 16-ON; 13, C-HR 18-ON 14, 4 Runner: 15-ON; 15, Sienna 15-20; 16, Sienna 21-ON;
...
Parts Included:
1) 1x Control Box;
2) 8x Sensors, Flush-mount Type, if you need other bigger ones, please leave message;
3) 2x Sensor Cables, Shorter one for Front Sensors, Longer one for Rear Sensors;
4) 1x Power and CANBUS Cable Harness;
5) 1x Buzzer (Supplied only when necessary, Most buzzers are already Built-in the control box;)
6) 1x Professional Hole-making tool;
How to install
For most carts, it is plug and play design. For certain cars, you may need to connect two CANBUS cables to the car CANBUS cables and the power to the fuse box ignition power source.. The default sensors supplied are flush-mount type, you need to remove the bumpers in order to install the sensors inside the bumper. We will supply relevant installation guide. In case of any question during installation, please contact us.