Tektronix DPO4EMBD Module for DPO4000, MSO4000, MDO4000, xB, xC series

Description

DPO4EMB application module is in great condition and contains valid license.
I²C Characteristics
Bus setup options
Sources (Clock and Data)
Analog channels 1-4
Digital channels D0-D15
Thresholds
Per-channel thresholds
Recommended probing
Single ended
Include R/W in address
Yes or No
Decode formats available
Hex, Binary
Display modes
Mode
Description
Bus
Bus only
Bus and waveforms
Simultaneous display of bus and logic waveforms
Event table
Decoded packet data in a tabular view
I2C bus setup, showing selection of bus display modes.
Bus trigger and search options
Characteristic
Description
Trigger and/or Search On
Start
Stop
Repeated Start
Missing Ack
Address (7 or 10 bit) with R/W Selection
Data (number of bytes 1-5)
Address and Data
Triggering on a specific address value on the I2C bus.
Bus decode
Characteristic
Description
Maximum Clock/Data Rate
Up to 10 Mb/s (for automated decoding of bus)
Decode Display
Start (green bracket)
Address (yellow box)
Missing Ack (red ! symbol)
Data (cyan box)
Stop (red bracket)
Event table for I2C bus with all captured packets time stamped and in a tabular view.
SPI Characteristics
Bus setup options
Characteristic
Description
Sources (Clock, Slave Select, MOSI, and MISO)
Analog channels 1-4
Digital channels D0-D15
Thresholds
Per-channel thresholds
Recommended probing
Single ended
Decode configuration
Farming
Idle Time (2-wire SPI)
Slave Select (3-wire or 4-wire SPI)
Clock
Rising or Falling Edge
Slave select
Active High or Active Low
MOSI
Active High or Active Low
MISO
Active High or Active Low
Word size
4-32 bits
Bit order
Most Significant (MS) First
Least Significant (LS) First
Decode formats available
Display modes
Hex, Binary
Bus
Bus only
Bus and waveforms
Simultaneous display of bus and logic waveforms
Event table
Decoded packet data in a tabular view
SPI bus setup, showing configuration options for bus sources.
Bus trigger and search options
Characteristic
Description
Trigger and/or Search On
SS Active
Start of Frame
MOSI
MISO
MOSI and MISO
Data: maximum of 128 bits (up to four 32-bit words or 32 four-bit words)
Triggering on a specific MOSI data value on the SPI bus.
Bus decode
Characteristic
Description
Maximum Clock/Data Rate
Up to 50 Mb/s (for automated decoding of bus)
Decode display
Start (green bracket)
Data (cyan box)
Stop (red bracket)
Event table for SPI bus with all captured packets time stamped and in a tabular view.