-40%
ThirdGen Camaro FLUSH "USB Center" Cup Holder/Charger Factory "fit and finish"
$ 37.54
- Description
- Size Guide
Description
REQUIRES CUTTING OF SHIFTER PLATE AND CONSOLE!FULL REFUNDS given for undamaged/unmodified items returned within 30 days. Absolutely NO PARTIAL REFUNDS GIVEN!
See my eBay store for other cup holder styles with USB charge ports and phone holders.
The USB charge port is LED illuminated available in
RED
,
GREEN
or
BLUE
. Message me if you have a color preference, otherwise I will pick what I have most of.
THIS ITEM REQUIRES CAREFUL CUTTING and removal of the existing ashtray section of center console shifter plate. Also required is the trimming of the hidden plastic inner flange of the console by about a quarter inch to make room for the two cup sleeves. Recommended cutting tool is a Dremel rotary tool with a cut-off wheel at low speed. Instructions for cutting are included.
For center consoles with automatic transmissions. Requires clean cutting along the line between the ash tray and shifter plate.
NOTE: FOR 82-84 Camaros these cup holders provide space for the original automatic transmission rigid curved shifter dust cover strip (instead of the later model 'rolltop' dust strip). There is enough gap for the cover strip to pass between the cup sleeves when the shifter is in 'Park'. However, part of the forward strip "guide" may also need trimming.
There is no need to modify the cup holders. MODIFIED cup holders cannot be returned.
includes powered USB port (includes wiring taps and fuse!)
AUTOMATIC transmission center consoles only!
Replaces existing ash tray section of shifter plate
'factory appearance' design,
top surface texture similar to center console
durable ABS plastic
color is satin flat black
Called "classic center" because it resembles a design first appeared on the internet. This, however, is an original design. It is a flush fit same as the ash tray (see pictures). Recommended cutting tool is a Dremel rotary tool with a cut-off wheel at low speed. Re-use the four
existing
factory
installed
3/4 inch long torx head bolts, from the ash tray console, to fasten/secure the bracket.
FITS ThirdGen Chevrolet Camaros MODEL YEARS: 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992