-40%

UT-200CH (ISDB-T/Tb Tx only), 1.2GHz for HAM TV

$ 110.35

Availability: 100 in stock
  • Frequency Band(s): 50~950MHz
  • All returns accepted: ReturnsNotAccepted
  • Brand: HiDes, Inc.
  • Condition: New
  • MPN: UT-200CH USB ISDB-T Modulator
  • Model: UT-200CH USB ISDB-T Modulator
  • Country/Region of Manufacture: Taiwan
  • Supported Modes: ISDB-T/Tb

    Description

    UT-200 - Features
    USB based modulator/demodulator with support for ARIB STD-B31 ISDB-T/ABNT NBR 15601 ISDB-Tb transmission and reception.
    Powered from the USB bus, so no external power adapter is required
    Full hardware modulation/demodulation, no host CPU computation required.
    Modulator (Transmitter):
    Direct digital conversion to 50..950MHz for excellent signal quality
    Standard
    6/7/8
    MHz bandwidth
    Layer mode supported: 1-layer (13-seg) and 2-layer (12+1 seg)
    No time-interleaver support
    Programmable digital attenuator
    Free Windows Stream Player
    Free Windows and Linux SDK
    A special version UT-200AJH/UT-200CH is available for HAM TV application, which can support 1.2GHz (1200…1350MHz) band.
    Demodulator (Receiver):
    UT-200AJ supports Free to Air Digital Terrestrial (ISDB-T/-Tb) Receptions (6 / 7 MHz bandwidth)
    (UT
    -200C
    does not support receiver function)
    Standard Windows ISDB-T BDA driver provided
    Windows
    Media
    Center
    compatible ISDB-T/-Tb TV tuner
    UT-200 - Applications
    ISDB-T/-Tb signal generator
    Demonstrations
    Research and development
    Video Broadcast/Distribution
    Digital Signage
    Wireless Display
    Hotel TV
    Hospital TV
    On-Board TV
    Luxury Home Entertainment
    Hotel Info TV
    Trade Shows
    Mall Info TV
    Campus TV
    In Stadium
    Live Sports
    Monitoring
    Surveillance
    Corporate TV
    Industrial Monitoring
    Amateur HAM TV
    Host Requirements
    CPU: Intel, AMD, ARM, MIPS
    128MB RAM of system memory or above
    Higher CPU and memory required if ISDB-T audio/video decoding is needed
    One available USB2.0 or 1.1 port
    Note: USB 1.1 can only support 3~5 Mbps stream data rate.
    Parameter
    Value
    RF connector
    Two 75-Ω MCX (female) connecters, one for Tx and one for Rx
    Bandwidth
    Transmitter
    6/7/8
    MHz
    Receiver
    (UT-200AJ only)
    6/7 MHz
    FFT (
    伝送モード
    )
    2K, 4K, 8K
    Constellation
    (
    キャリア変調方式
    )
    64QAM/16QAM/QPSK
    Code rate
    (
    畳み込み符号
    )
    1/2, 2/3, 3/4, 5/6, 7/8
    Guard interval
    (
    ガードインターバル比
    )
    1/4, 1/8, 1/16 or 1/32
    Time-interleaver
    (
    時間インターリーブ
    )
    Not supported
    Layer (
    階層数
    )
    1-layer (13-seg)
    and 2-layer
    (12-seg +1-seg)
    1-
    階層
    (13
    セグメント
    )
    / 2-
    階層
    (12+1
    セグメント
    )
    Segment
    (
    周波数セグメント
    )
    13
    セグメント
    /
    12+1
    セグメント
    Frequency range
    50 .. 950MHz
    UT-200AJH/UT-200CH 50 .. 950MHz, 1200-1350MHz
    RF Output Level
    -3 dBm (105 dBuV) @V-band
    -5~-8 dBm (100-103 dBuV) @470-950 MHz
    -14 dBm (94 dBuV) @1200-1350MHz
    Digital Attenuator
    Range:+6/-25dB* , Step size 1dB
    MER
    Typically
    33dB@V-band
    30dB@470-950 MHz
    28dB@1200-1350MHz
    Spectrum Shoulder
    (Adjacent channel)
    40dB
    Phase noise
    <-92dBc @ 10kHz
    Carrier Suppression
    >42dB
    USB port
    USB 2.0 or USB 1.1
    Power
    5V DC (USB Bus Power)
    390mA (Tx and Rx)
    170mA(Rx only)
    340mA(Tx only)
    Dimensions (LxWxH)
    75x 30 x
    15mm
    Note: There could be MER loss in high gain/attenuation level.
    Digital Signage Application Scenario-Wireless
    Digital Signage Application Scenario-Wired
    Mini-headend full HD TV Broadcast System
    System Deployment Example – Bus Topology