Uyigao UA6013L High Precision Digital LCD Digital Capacitance Meter Tester

Description

<div style="text-align:center"><img src="http://ti2.auctiva.com/sw/java.gif" border="0"><br><table align="center"><tr><td><a style="text-decoration:none" href="http://store.auctiva.com/ebaytrustee"><img src="http://ti2.auctiva.com/sw/browse1.gif" border="0"></a></td><td height="23px" valign="middle" align="center"><font face="arial" size="2"><b><a href="http://store.auctiva.com/ebaytrustee">ebaytrustee</a> Store</b></font></td></tr></table></div>
Uyigao UA6013L High Precision Digital LCD Digital Capacitance Meter Tester
Features
6013L type digital capacitance meter is pocket, convenient operation, accurate numerical reading, low-consumption, driven by battery, and showing numbers in a big LCD. Being accurate in measuring, it covers 9 measuring sections, a wide rang from 0.1pF to 20,00μF. It can be used in testing error testing, numerical analysis, selecting capacitance, measuring unknown capacitance, matching capacitance, and measuring the capacitance of cable, switch and printing electrocircuit.
It is applied with CMOS double-bevel A/D convertor that is automatic in zeroing and polar selection, and makes instruction for beyond measuring range.
Wide measuring range, covering 9 measuring sections from 0.1pF to 20,000μF that includes nominal value of any capacitance.
Biggest display value: 1999(3 1/2).
Reading: 2-3 readings/sec.
Zeroing: There is a zeroing knob on the front, easy for operation.
Data hold: Put the “HOLD” switch to "ON" and the DH sign will appear on the display.
Temperature for accurate measuring: 25±5°C
Temperature range: working temperature: 0 to 40°C
Storage temperature: -10to 50°C
Relative humidity: <80%
Power supply:9V laminated battery(Not included)
Specifications:
Accuracy: ±(%reading±digits) Quality guarantee: one year
Environment temperature: 25°±5°
Relative humidity: <80%
Rang Accuracy Definition Testing frequency
200pF ±0.5% ±20digit 0.1pF 800Hz
2nF ±0.5%±20digit 1pF 800Hz
20nF ±0.5%±20digit 10pF 800Hz
200nF ±0.5%±20digit 0.1μF 800Hz
2μF ±0.5%±20digit 1nF 800Hz
20μF ±0.5%±20digit 10nF 80Hz
200μF ±0.5%±20digit 0.1μF 8Hz
2000μF ±2.0%±20digit 1μF 8Hz
Color:Grey+Red
Dimension:148 x 75 x 33 mm
Weight:173 g
Package weight:193 g
Package included:
1 x Capacitance Tester
2 x Probes
Operation:
Firstly, check a 9V battery whether its electric voltage is short that will show signal on the left-upper of the LCD. Secondly, pay attention to the polarity or the capacitance to be tested. Thirdly, recharge the capacitance before measuring.
1. Select proper measuring section according to the capacitance to be tested.
2. Check and use the zeroing knob on the front of the meter to adjust the value to zero before measuring.
3. Insert the black sensor into the jack with “-”signal and the red sensor into the jack with “+”.
4. Connect the capacitance to be tested with the two sensors. Pay attention to the polarity of the capacitance ! Read capacitance numerical value displayed.
Notes
a. If you don't know the approximate value of a capacitance, you should select measuring section of 200nF and then make relevant adjusting according to practical situation.
b. If the capacitance is in short circuit, the meter shows "beyond measuring range". If the capacitance is in electric leakage, the meter shows "beyond measuring range" or "much bigger than the normal value". If the capacitance is open-circuit, the meter shows "Zero" or "several pF ".
c. In testing small capacitance, directly ｉｎｓｅｒｔ the capacitance into the jack instead of using the sensors for better accuracy.
Maintenance
The meter is of highly accurate electronic apparatus. Don't change its internal circuit rashly for no damage to the meter.
1. Don't exert electric voltage upon the jack parts of the meter for no damage to the meter.
2. Don't test the sensors in short circuit , or the battery will be consumed out quickly.
3. Don't use a meter whose back cover doesn't cover the meter well.
4. Always replace battery and fuse after taking sensors out of a meter that is switched off. First, screw bolts in the back cover out. Second, take off the back cover. Third, replace battery and fuse according to specification provisioned in the operation manual. Suitable fuse for this meter is 200mA/250V, which external dimension is φ5×20mm.
5. Please take out the battery when not using for a long time.
Shipping &Tracking FQA:
When will my order be shipped?
We will ship your order within 24 hours (one business day), except on government holidays and weekends.
When can I get my order?
It usually takes about 2-9 business days to deliver the package depends where you are.
How can I track my order?
You can login to your ebay account and check it under the order/transaction page.
Will you ship to Alaska, Puerto Rico, Hawaii, or APO address?
Yes, we do
Term of Sale
Please
DOUBLE CHECK your shipping address
before checkout since
we are NOT responsible for undelivered/lost packages due to invalid address, or non-updated address
. Had the package returned to us, we would either refund your payment without actual shipping cost (including the UPS shipping back cost), or you have to pay for the re-send shipping cost (with valid/updated address).
If we are unable to finish the deal due to inventory issue, we are sorry about that, and we will fully refund you shortly.
Within 30 days, you can return it for refund as long as the cable is still in its original packing, AND, you will pay for the return shipping cost.
We use automatic feedback tools. The system would leave you a feedback once your do the same.
Have ALL your questions answered before bidding. If you have any problem/issue with the transaction, please contact us
. We will try our best to have it solved.